DAP Technology 1394, Руководство по эксплуатации

Страница: 49 / 458

Commander
49 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
If you want to change a value, change it in the field list and press the 'Write Changes' button. As soon as
a value has been changed by the user, but has not been written yet, the changed field will be displayed in
red and the 'Write Changes' button will be enabled (see example above).
Note that the phy registers of the local node can be read and written. Phy registers of remote nodes
however, can only be read. And they can only be read if the node complies with the IEEE1394a standard,
because the Remote-Access Packet and Remote-Reply Packet type of the phy packets defined in
IEEE1394a are used for this operation.
If a node could not be read, the left and middle displays are empty.
6.2. Details
Multi-bus Analyzers
For multi-bus analyzers only, the toolbar contains the following control to select the active Analyzer node.
This control can be used to select the Analyzer node to view information for. By clicking on the "a", "b" or
"c", the corresponding node can be hidden or shown. A red background indicates the node is shown. A
white background indicates a node is hidden. In the Topology View, only one node can be shown at the
same time.
For multi-bus analyzers only, pressing this button initiates a bus reset on all busses of the FireSpy.