DAP Technology 1394, Руководство по эксплуатации

Страница: 126 / 458

Symbol Recorder
126 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
9.1.1. How to use it
9.1.1.1. Display Symbol Recorder Files
Initially, there is no recorded data and the views are empty. You can load a symbol recorder file into the
Symbol Recorder using the 'Open' command of the 'File' menu. You can select a file (extension .sym) and
it will be loaded. In the example below, the recorder file 'twoanalyzers.sym' is opened.
You can use the 'Recorder' menu or toolbar buttons to start recording raw data into internal memory of the
Analyzer, and download them to the host. The recorded data can be viewed in the same way an opened
file can be viewed. The recorded data can also be saved to disk as a symbol recorder file using the 'Save
As' command in the 'File' menu.
9.1.1.2. Record Symbols
Before making a recording it is important to set the correct speed and polarity. The speed should be set to
the actual connection speed of the connection the FireStealth is placed in line with. The polarity should be
set according to the actual polarity of the two cables plugged in. Please refer to the section about
FireStealth connection settings .
If the internal symbol recorder memory of the Analyzer is empty, you can start recording by selecting the
'Start' command from the 'Recorder' menu, or clicking the 'Start Recording' button in the toolbar.
When the internal recorder memory is not empty, you can clear it with the 'Clear' command in the
'Recorder' menu or by clicking the 'Clear FireSpy recorder memory' button in the toolbar.
The 'Recorded bytes' box in the toolbar will display the number of recorded bytes, and the 'Record