manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 290

Audio Video / Control protocol (AV/C)

290

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

In the dialog you see an upper part to specify one or more 'Node Specifications', and a lower part to
specify protocol specific information. In between these two parts, general options can be selected.
For a correct analysis, the Unit information of the AV/C device to be analyzed must be present. To be
able to specify a Unit, you will first need to specify the device (Node Specification) the Unit is part of.
For more information about Node Specifications and the protocol independent part of the 

Protocol

Settings

, see Protocol Settings. For the AV/C-protocol-specific settings, see below. 

Node Specifications
If no AV/C Units were found automatically, you have to specify one or more Units manually. Before you
can specify a Unit, you have to specify the node the Unit is part of using a Node Specification. When the
AV/C device is still connected to the bus after recording, you can use the 'Search Current' button to
automatically find AV/C Units. Adding such a Unit will create a Node Specification and Unit. The created
Node Specification will be filled automatically when possible. You probably will have to select correct
nodes for some reset segments. Make sure you have selected the AV/C node correctly for those reset
segments for which transaction and packets are recorded that you want to analyze. For more information
on Node Specifications, see 

Protocol Settings

. 

General options
Mark unhandled packets
For information about this checkbox, please see 

Protocol Settings

. 

Protocol specific information

Enable AV/C analysis
Check this box to enable the AV/C analyzer. All protocol tabs in this dialog have such a checkbox, which
can be useful if a recording contains data from several protocols, and you are not interested in some of
these. 

Units
In the Units table, one or more AV/C Units can be specified. The information in this table normally can be
found in the Configuration ROM of the AV/C node. It consists of: 

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды