manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 382

Hardware

382

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

The Power LED will light up red when power is supplied to the power connector on the back. Please be
aware that this LED also lights up when the Power Switch on the back is in the Off position.

USB LED
The USB LED will light up when the FireSpy is connected to the USB port of  your computer (see 'FireSpy
Rear' below) and the computer is switched on. It indicates the availability of USB bus power.

LEMO Connectors
With these connectors the FireSpy can be connected to the IEEE1394 bus to be analyzed. Each
connector may be connected to the bus. The IEEE1394b ports are (from left to right) A0, A2, B0, B2, C0,
C2.
Each connector is transformer coupled.

24.1.1.4. FireSpy Rear

Power Switch
Using this switch the FireSpy can be switched on and off. When switched on, the Unit LEDs on the front
panel will light up orange to indicate they are starting up. Note that the power supply needs to be
connected to the FireSpy (see below) to be able to switch the FireSpy on.

Power Connector
The power supply must be connected to the FireSpy, using this connector. Note that, for safety reasons,
only the original power supply should be used. Whenever power is supplied to the analyzer, the Power
LED on the front panel will light up red. (Even when the Power Switch is in the Off position).

Auxiliary Connector
The auxiliary port will be discussed in a separate chapter. See 

Auxiliary connector ports

. 

USB3 Connector
The FireSpy must be connected to the computer using this connector. A USB3 cable, which is part of the
FireSpy-package, is connected between this connector and the USB3 port of the computer.

Serial Number

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды