DAP Technology 1394, Руководство по эксплуатации

Страница: 330 / 458

Custom Protocols
330 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
this part is filled completely (see the Recorder for more information).
Manually inputting custom-made protocol information
If no Configuration-ROM reads are recorded, you will need to input this information manually. Also if only
part of this information can be found automatically, you will need to add information manually. You can do
this in the 'Protocol Settings' dialog. It can be opened by clicking the 'Protocol Settings' button on the
toolbar (see below). This dialog shows information used by the protocol analyzer. It initially shows all
information that it found automatically and you can change or add information manually. See the
description of the 'Custom-made Protocol Settings' below for more information.
19.3. Details
The Protocol View consists of a toolbar on the top, with three parts below it: the 'relations' pane, the
details pane and the 'transactions and packets' pane.
19.3.1. Toolbar
At the top of the Protocol View you will find a toolbar with a few buttons:
In front of the name 'Protocol View' a star '*' will be displayed if the protocol analysis settings have been
modified.
Protocol Settings
When clicking this button, the 'Protocol Settings' dialog will be displayed. It shows information used by the
protocol analyzer. It initially shows information that was found automatically and you will be able to
change or add information. See 'Custom-made Protocol Settings' below for more information.
Go to next item with warning(s)
When clicking this button, the next item that contains one or more warnings will be selected.
Go to next item with error(s)
When clicking this button, the next item that contains one or more errors will be selected.
Show Transactions and Packets
This button toggles the display of the right pane at the right side of the Protocol View.
Triple Analyzers
For triple Analyzers the toolbar looks as follows:
It contains the following additional control:
Analyzer node select control
With this control you are able to select the protocol analysis result of each supported Analyzer node.
19.3.2. Relations Pane
This pane shows all custom-made protocol items found by the protocol analyzer and displayed in a tree.
The tree structure indicates the relation between the items. All items of the tree are listed in the same
order as the corresponding transaction of each item was recorded.