manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 406

Hardware

406

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

The FireSpy is triggered when it detects a positive pulse of minimal 3 Volt (resulting in a current of about
1.6 mA) and a duration of typical 10 uS.

24.2.1.4. FireSpy Rear

power switch
Using this switch the FireSpy can be switched on (powered) and off. When switched on the 'power led' on
the front will light up. Note that the power supply needs to be connected to the FireSpy (see below) to be
able to switch the FireSpy on.

power connector
The power supply must be connected to the FireSpy, using this connector. Note that, for safety reasons,
only the original power supply should be used.

auxiliary connector
The Auxiliary port is a programmable. Using the settings window, some special functions can be assigned
to the aux0 through aux3. The auxiliary port will be discussed in a separate chapter. See Aux-Port. 

USB connector
The FireSpy must be connected to the computer using this connector. A USB cable, which is part of the
FireSpy-package, is connected between this connector and the USB port of the computer.
The USB interface is electrically isolated from the IEEE1394 logic to prevent ground loops.

serial number
Each FireSpy has a 5 character serial number. This number is also programmed into the FireSpy and can
be read with the License Manager of the FireSpy application. Part of the software will only work when
license keys are installed for the serial number of the currently connected FireSpy. See 

License Manager

for more information on license keys.

24.2.2. FireSpy 410b(T)(1), 810

FireSpy 810

The FireSpy810 bus analyzer is the flagship in the second generation of FireWire analyzers from

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды