manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 421

Hardware

421

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

This red led will light up when the Scriptor is active. See Scriptor.

generator led
This red led will light up when the FireSpy Generator is active. See Generator.

record led
This red led will light when recording is in progress. See Recorder.

trigger led
This green led will light up when the FireSpy Recorder has been triggered. See Recorder.

24.3.1.4. FS3811 Front

power led
This green led will light up when the power supply is connected to the FireSpy (see 'FireSpy Rear' below)
and the FireSpy is switched on. It indicates the availability of power from the power supply

USB led
This green led will light up when the FireSpy is connected to the USB port of your computer (see 'FireSpy 
Rear' below) and the computer is switched on. It indicates the availability of USB bus power.

ethernet led
This green led will light up when the FireSpy is connected through its ethernet port (see 'FireSpy  Rear'
below) and the network is active.

The initialization led
This red led will light up when the FireSpy is performing an initialization of the firmware.

IEEE1394b connectors (6x)
With these connectors the FireSpy 3811 can be connected to the IEEE1394 bus to be analyzed. Each
connector may be connected to the bus. The IEEE1394b ports are (from left to right) A0, A1, B0, B1, C0,
C1.

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды