manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 106

Recorder

106

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

the same order as displayed in this tree. However, all items inside the same item of the tree (at the same
level) are listed in the same order as the order of recording the first corresponding packet of each item. To
find out the order of corresponding transactions and packets, see the 'transactions and packets' pane or
take a look at one of the other views of the Recorder (e.g. the Transactions View). 

The example below shows the relations pane of an SBP analysis. 

The hierarchy of the tree shows the nodes as root items, the units as child items of the nodes and the
found results of the protocol analyzer as child items of the units. The terminology of the protocol
determines how units and found results of the protocol analyzer are displayed in a tree, see also figure
above. In a tree, the nodes are represented by their node specification ID. For more information about
node specification ID, see 

Protocol Settings

. 

Click in the tree to highlight an item. If one or more transactions or packets in the 'transactions and
packets' pane correspond to the highlighted item, the first of these transactions or packets will highlight
and the remaining of these transactions or packets will be indicated with a gray background color.

7.6.2.3. Details pane

The 'details' pane shows the details of a highlighted item in the 'relations' pane. This part is protocol
dependent, but mostly the 'details' pane will show the fields or layout of the selected item. This item may
correspond to one or multiple transactions. In the example below for instance, the 'details' pane of a 'Data
Table' item from a SBP analysis is shown. We can see that this 'Data Table' has a size of 64 bytes and is
transferred using 8 transactions. The second transaction was selected and the data corresponding to the
selected transaction is indicated with a red bar. 

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды