manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 298

Internet Protocol version 4 (IP4)

298

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

of corresponding transactions and packets, see the 'transactions and packets' pane or take a look at one
of the other views of the Recorder (e.g. the Transactions View). 

For each found or manually specified NodeSpec there will be a root item in the tree (NodeSpec 0 above).
For information about NodeSpec's, see 'IP4-Protocol Settings' below. For each found or manually
specified Unit, there will be a Unit item inside the corresponding NodeSpec (Unit 0 in NodeSpec 0
above). 

A black item indicates that it has no corresponding transactions or packets (e.g. NodeSpec and Unit
above). It just is used for proper grouping of the items in the tree. All colored items however, correspond
to one or more transactions or packets. When selecting such an item, the details of that item are
displayed in the 'details pane' and the corresponding transactions and packets are highlighted in the
'transactions and packets' pane (see below). Note that bus resets like '' are also displayed in black, but
have a corresponding item in the 'transactions and packets' pane. 

The type of items that can be displayed are: 

·

Node: displays a 1394 node with IP4 units inside that node below it. Each node gets a logical node id,
which is fixed for the entire recording. This logical node id is called a NodeSpec and is displayed in the
tree. 

·

Unit: displays a IP4 unit inside a 1394 node. The tree shows the unit number and IP address(es) of the
unit as seen in packets sent by the unit. 

·

TCP connection: groups all TCP packets belonging to a single TCP connection. 

·

ICMP group: groups all ICMP packets belonging to a related series. 

·

ARP group: groups all ICMP packets belonging to a related series. 

·

UDP packet: a single UDP packet 

·

TCP packet: a single TCP packet 

·

Packet group: if a packet is fragmented the packet will be shown as a tree item with all the fragments
listed as children. The children will have added ' - Data' to their name. 

·

Other IP protocols: any packet the analyzer doesn't handle specially is displayed on its own. 

The following color scheme is used for these items: 

·

item group 

·

item sent by the unit that is part of a group

 

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды