DAP Technology 1394, Руководство по эксплуатации

Страница: 226 / 458

Filter/Trigger
226 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
Skip by packet type
Using this box, you can select which packet types need to be skipped by the Recorder. You can select
some packet types (like Cycle packet or Stream packet), you can select some packet type combinations
(like Write Request and Response packets) and you can select packet with some kind of error (like
packets with invalid tcode in header).
In the example above, all Cycle Start packets will be skipped.
Skip by packet Set(s)
Here you can type in a set name or any boolean combination of the four sets. All packets that fit the Set or
combination of Sets, will be skipped. In the example above, all packets that fit the description of SetA or
SetB will be skipped.
The set names that can be used are 'seta', 'setb', 'setc' and 'setc'. The names are not case sensitive, thus
'SetA' is valid too. You also can use just 'a', 'b', 'c' or 'd' (or 'A', 'B' etc.) for the set names. The Boolean
operators are 'not', 'and' and 'or'. But they may be substituted by the characters '!', '&' and '|' respectively.
Parenthesis may be used to group the Boolean operation.
Some examples of valid expressions are:
setc
NOT SETB
(seta or setb) and not setd
!SetA & (SetC | SetB)
a
C or D
Note that a red cross will be displayed before the boolean expression when there is an error in the
expression.
Skip by speed