manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 306

Serial Bus Protocol (SBP)

306

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

17.1.2.2. relations pane

This pane shows all transactions and packets found, grouped into items and displayed in a tree. The tree
structure indicates the relation between the items. The items are not necessarily recorded in the same
order as displayed in this tree. However, all items inside the same item of the tree (at the same level) are
listed in the same order as the order of recording the first corresponding packet of each item. To find out
the order of corresponding transactions and packets, see the 'transactions and packets' pane or take a
look at one of the other views of the Recorder (e.g. the Transactions View). 

For each found or manually specified NodeSpec there will be a root item in the tree (NodeSpec 0 above).
For information about NodeSpec's, see 'SBP-Protocol Settings' below. For each found or manually
specified Unit, there will be a Unit item inside the corresponding NodeSpec (Unit 0 in NodeSpec 0 above).
And for each found or manually specified login, there will be a Login item inside the corresponding Lun
item (Login 0 in Lun 0 above). These NodeSpec, Lun and Login items are colored black in the tree. 

A black item indicates that it has no corresponding transactions or packets (e.g. NodeSpec and Unit
above). It just is used for proper grouping of the items in the tree. All colored items however correspond to
one or more transactions or packets. When selecting such an item, the details of that item are displayed
in the 'details pane' and the corresponding transactions and packets are highlighted in the 'transactions
and packets' pane (see below). Note that the black 'Command' items (see example above) do not have
corresponding transactions. It is also used to group the items belonging to the command. Note also that
bus resets like '' are also displayed in black, but have a corresponding item in the 'transactions and
packets' pane. 
The type of items that can be displayed are (listed in the same color as displayed in the tree): 

·

item group 

·

Management accesses

 

·

Command-agent accesses

 

·

Orb reads and next-orb pointer re-read

 

·

Data transfers including data tables

 

·

Orb status and unsolicited status

 

17.1.2.3. details pane

The middle part of the Protocol View shows the details of the item that is selected in the 'relations' pane.
An example that shows the details of a 'Login response' item follows: 

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды