manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 166

Scriptor

166

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

11.2.6.3. Breakpoint View

The Breakpoint view displays a list of all the breakpoints that are currently set in the script. For each
breakpoint listed, the following information is shown:

·

If a process is broken at this breakpoint, an arrow is shown. See row 4 in the picture above

·

The name of the function the breakpoint is positioned in

·

The line number the breakpoint is set at

·

The condition that must be met for a process to break at this breakpoint (conditions cannot be edited
yet, so a process always breaks at a breakpoint)

·

The text of the script line the breakpoint is positioned at

By clicking on a breakpoint, it will be highlighted in red and the script-tree editor will move to the
corresponding line in the script. The selection in the breakpoint view is not related to the selection in any
other Debug View.

By clicking on the red cross in the toolbar of this view, the currently selected breakpoint will be deleted.

11.2.6.4. Process View

The Process View displays a list of processes. For each process listed, the following information is
displayed:

·

Enable checkbox: If checked, the process is currently in debug mode, otherwise not

·

The name of the process

·

The priority of the process (smaller number means higher priority)

·

The current status of the process. 

Possible process state values are:

·

unknown: The process is not being debugged, or the state has not been updated yet

·

not started, The process is not yet started

·

running, The process is currently running

·

stopped, The process stopped running

·

ready, The process is ready to execute the next code, however another process is already running

·

paused, The process is paused by the user

·

waiting (packet), The process is waiting for a packet to be sent or received

·

waiting (STOF), The process is waiting for the start of the next frame (Mil1394 mode only)

·

waiting (STOF packet), The process is waiting to receive a STOF packet (Mil1394 mode only)

·

waiting (bus reset), The process is waiting for a bus reset

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды