manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 400

Hardware

400

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

24.1.5.3. FireSpy Front

Generator LED
This LED will light up green while the FireSpy Generator is active. See Generator.

Recorder LED
This LED will light up red while recording is in progress. After the recording stops it will be orange during
the post-processing phase. As soon as data is ready for download to the host, the LED will turn green. See
Recorder.

Trigger LED
This LED will light up green while the Trigger/Sequencer is active but not yet triggered. When the Trigger
occurs, the LED turns red. See Filter/Trigger.

FireSpy Unit
This FireSpy model consists of two double FireSpy Analyzer Units to form a total of 4 analyzer nodes.
Each Unit has its own section on the front panel with connectors and status LEDs. Units are numbered
top-down from 1 to 2. The FireSpy application can be used to control one unit at a time or multiple units
simultaneously.

FireSpy Unit Status LED
This led will light up orange when the FireSpy Unit is switched on but not yet configured. The bootloader
will configure the device with the firmware version last used. When configuration is successful the LED
will turn green. A red LED indicates an error.

Node A and B Act LEDs
(Not yet implemented) The function of these LEDs can be configured through the settings dialog of the
FireSpy Application. These LEDs can also be controlled by the FireSpy Scriptor.

Power LED

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды