manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 405

Hardware

405

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

24.2.1.3. FireSpy Front

USB led
This green led will light up when the FireSpy is connected to the USB port of your computer (see 'FireSpy
400 Rear' below) and the computer is switched on. It indicates the availability of USB bus power.

power led
This green led will light up when the power supply is connected to FireSpy (see 'FireSpy 400 Rear' below)
and the FireSpy is switched on. It indicates the availability of power from the power supply.

IEEE1394 connectors (2x)
With these connectors the FireSpy 400 can be connected to the IEEE1394a bus to be analyzed. One or
both connectors may be connected to the bus (as long as no loops are created).

record led
This red led will light when recording is in progress. See Recorder.

record ready led
This green led will light up when the FireSpy Recorder is ready. See Recorder.

active led
This red led will light up when the FireSpy Generator is active. See Generator.

trigger led
This green led will light up when the FireSpy Recorder has been triggered. See Recorder.

manual trigger
Pressing this button will trigger the Recorder when recording is in progress and the Recorder is not yet
triggered.

external trigger
Using this connector, the FireSpy can be triggered with an external electrical signal when recording is in
progress and the Recorder is not yet triggered.

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды