manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 214

Filter/Trigger

214

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

  

The result is that the Jump item is enclosed in a Repeat-start and a Repeat-end item. Executing this flow
would repeat the Jump item 2 times, which does not make any sense. You can expand the repeat block
by using the Move item up button when the Repeat-start item is selected, or using the Move item down
button when the Repeat-end item is selected. In the example below, the Repeat-start item has been
moved one item higher. Also the number of times the repeat box should be executed has been increased
to 1000. This can be done in the Repeat Properties box, when the Repeat-start item is selected.

Now the flow does something meaningful: the Recorder will be triggered when 1000 packets have been
detected that fits the description for packet setA.
Below the Repeat item will be described in more details.

button: Delete Item
Clicking this button will delete the selected item.

flow diagram area
In this area the flow diagram will be drawn. The flow always start with a Start item and ends with a Stop
item. Inbetween one or more Wait, Jump, Action or Stop items may exist and groups of items can be
enclosed in a Repeat box.
When the sequencer is started, the execution starts after the Start item and continues until a Stop item is
executed. A red arrow will indicate the currently executed item (see above).
Items can be selected by clicking with the mouse on an item. New items can be inserted and existing ones
can be removed using the buttons above the flow diagram area. Items can also be moved up and down in
the flow and for Jump items the jump target can be moved up and down using buttons above the flow
diagram area. Groups of items can be enclosed in a Repeat box by using the Add Repeat button and the
number of items enclosed in the Repeat box can be changed by moving the Repeat-start or Repeat-end
items up or down.
When an item is selected, the Properties pane will show the properties of the item. The properties can be

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды