manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 326

Automotive Multimedia Interface - Collaboration protocol (AMI-C)

326

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Check this box to enable the AMI-C analyzer. All protocol tabs in this dialog have such a checkbox, which
can be useful if a recording contains data from several protocols, and you are not interested in some of
these. 

Units
In the Units table, one or more AMI-C Units can be specified. The information in this table normally can be
found in the Configuration ROM of the AMI-C node. It consists of: 

·

Unit: Using the checkbox before each Unit in the table you can enable or disable each Unit individually
for analysis. If the box is not checked, the AMI-C-related transactions and packets for this Unit will be
skipped. 

·

Node Spec.: A Unit is part of a node. As explained before, nodes are specified using Node
Specifications. The number in this column corresponds to the Node-Specification numbers of the table
in the upper part of the dialog. 

18.2. Editing AMI-C Formats

The Analyzer software supports AMI-C command sets for the AMI-C protocol compliant with standard ISO
22902. If, however, you need support for a command set not supported by the Analyzer AMI-C software,
then you can define your own custom command set using the FormatEditor.

For each custom command set you have to create a format set file, with a format definition for the VIP
frame. The defined command set can be used by the AMI-C analyzer to display the commands and
associated responses in the correct format. It can also be used in the Filter Sets for the Filter/Trigger logic
to define conditions on the fields in particular command or response.

You could create a new format set with the FormatEditor and start building your format defintions from
scratch. But probably the easiest way is to open an existing format file for the AMI-C protocol and adapt it
to your needs.

18.2.1. Example

The first format definition, called 'VIP Frame' (color magenta) defines the format for the AMI-C commands
and responses. It always needs to be present in a format set for the AMI-C protocol.

The other definitions (color blue) are macro definitions.

VIP Frame

The format definition 'VIP Frame' defines the format of the commands and responses for AMI-C protocol.
Below the 'VIP Frame' definition is shown in more detail.

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды