DAP Technology 1394, Руководство по эксплуатации

Страница: 402 / 458

Hardware
402 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
Each FireSpy has an 11-character serial number. This number is also programmed into the FireSpy and
can be read with the License Manager of the FireSpy application. The software will only work when a valid
license certificate is installed for the serial number of the currently connected FireSpy. See
License
Manager for more information on license certificates.
24.2. Advanced Series
The “Advanced Series” of FireSpys redefines 1394 data analysis! Built on top of the proven “Basic Series”
this brand-new line features better performance due to a more powerful on-board processor, bus power
provider capability, new connectivity interfaces (USB 2.0 and Ethernet, PCI), enhanced Scriptor
capabilities and more data capture memory.
The Advanced Series uses an more powerful architectural design with a 400MHz on-board PowerPC. A
standard off-the-shelf Physical Layer chip connects to a highly optimized FPGA which not only acts as a
Link layer but also incorporates the data recording functionality, Trigger and Filter engines as well as the
Data Monitor. Recorded data is directly captured into onboard memory of 512MB (1GB for the
FS850/FS450b).
The user can easily connect the analyzer to his PC (laptop) via a USB2.0 or Ethernet connection. All data
transfer to the PC is offline, so there is no potential for the loss of data.
FireSpys from the Advanced Series are also available in PCI (FSx50y) and very soon in CompactPCI
(FSx70y) configurations.
24.2.1. FireSpy 410
The FireSpy410 is a small, compact instrument that is equipped with 512 MB internal memory. The unit
offers extensive hardware filtering and trigger possibilities due to efficient programmable logic and an
on-board processor. It supports up to 400Mb transfer rate and is fully IEEE 1394-2000 compliant. Two
standard 1394 ports allow for convenient connection to the system under test.
The FireSpy410 may be connected to a host computer via the USB 2.0 interface. Furthermore, an
Ethernet port allows for easy network integration and remote control. The graphical user interface runs on
Windows™ XP and Windows™ 7. It is self-intuitive and
offers a user-friendly interface. Additionally, the included FireSpy API even allows you to build your own
control software by using its interfaces to several programming languages like C++, LabVIEWTM and
LabWindowsTM.
24.2.1.1. Main Feature Summary
General
· IEEE 1394-1995 and 1394a-2000 compliant
· Supported S100, S200, S400 (Legacy)
·
Connects to host using USB 2.0 interface or to LAN via 10/100 BaseT
· Electrical isolation between IEEE 1394 and host (USB)
· Optional Bus Power: 2.8 Watts at 12 Volt
·
480 MByte memory for packet and data storage
· Firmware field upgradeable to enable future expansions
·
External Trigger Input, positive edge
·
AUX connector for:
· Trigger input and output functions
·
Recording external event
·
Software runs on Windows™ XP and Windows™ 7
Monitor
·
Displays bus activity:
· isochronous packets
·
all types of asynchronous packets
·
all types of PHY packets
· all types of acknowledge packets