DAP Technology 1394, Руководство по эксплуатации

Страница: 135 / 458

Symbol Recorder
135 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
Packet' type does not correspond to the real packet type, an error page is added to the 'Fields' and
'Layout' pages. Selecting this page will list all detected errors.
Below, an example of the 'Errors' page is shown. In this example, the packet above is shown as a stream
packet, which of course will result in errors.
If one or more fields or data is missing (like in the case of 'Data-Block size too small' error above) the
'Field' and 'Layout' pages will also reflect the error by displaying the missing parts in red. Likewise, when
there is too much packet data, the parts that are too much are also displayed red in the 'Fields' and
'Layouts' pages.
9.4. Symbol View
The Symbol View is one of the possible views in the Recorder which you can use to investigate the item
selected by the cursor in the Time View. The following items can be found when investigating a recording.
· SignalDetect
·
Raw
·
Toning
· Token
·
Error
These items are described below.
9.4.1. How to use it
The Symbol View allows for navigating to previous or next items. The Bit Offset field shows the current bit
position in the recording. It can be used to jump to a different position by editing the field. The list below
the toolbar shows the properties of a selected symbol.