manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 148

Generator

148

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

10.2.2. Details

10.2.2.1. Menu

File

Open
With this command you can open an existing Analyzer generator file. By default these files have an
extension of .fsg.

Save
With this command you can save the current generator data as a Analyzer generator file. By default these
files have an extension of .fsg.
Generator data saved this way, can later be used again by invoking the 'Open' command of the 'File'
menu. If no file name was given before, a file dialog is displayed to enter the file name and path.

Save As
This commands does the same as the 'Save' command, except that it will always display the file dialog,
so that you can specify a file name and path.

Generator
Start
This command can be used to start the generator. If the Generator data has not yet been uploaded, a
dialog box will popup to confirm Generator data upload. If successful, the generator will start generating
the packets.

Stop
This command can be used to stop the generator. The generator data will remain in the Analyzer for an
optional next run.

Upload
Upload the current Generator definition to the Analyzer.

Clear
Clear the uploaded Generator definition from the Analyzer.

Slot Definitions
With this command, the slot definition editor can be opened. For a description of how it works, please
refer to the 

Slot Definitions

 section.

Frame Settings
With this command, the frame settings dialog can be opened. For a description of how it works, please
refer to the 

Frame Settings

 section.

Windows
From the 'Windows' menu you can open one of the other windows of the Analyzer.

10.2.2.2. Toolbar

The toolbar contains respectively the following items:

Generator active indicator
This red indicator lights when the isochronous Generator is active. The Generator is active when it is
started and has not stopped yet. An active isochronous Generator does not always mean that it is actually
generating packets, because it can be waiting for the next isochronous cycle start to generate the next
packet or it can be in the middle of cycles for which no isochronous packets are defined.

Start isochronous generator
Clicking this button will activate the isochronous Generator. The uploaded isochronous packets will be

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды