manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 115

Recorder

115

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

·

Data Values box to specify optional data field conditions 

Primary Packets or Phy Packets
Here you can select whether this set specifies primary packets or phy packets. Primary packets are
Request packets, Response packets, Cycle Start packets or Stream (isochronous or asynchronous)
packets.
If you select Phy Packets, then you can specify optional phy-packet field-value conditions using the
Data-Values box. The Header-Values box will be disabled for the Phy Packets.
If you select Primary Packets, then you can select packet types in the Primary-Packets box. You can
specify optional header-value conditions in the Header-Values box and optional data-value conditions in
the Data-Values box.

Packet Speeds
Here you can select which speed a packet should have to fit the Set. If no speed is selected at all, no
packet will fit the Set at all. If you select all speeds, the speed of a packet doesn't matter. In the example
above, packets of speed 100Mb/s or 200Mb/s do not fit SetA.

Primary Packets
Here you can specify which primary packet types may fit the Set. All types for which the corresponding
checkbox is not checked, do not fit the Set. So in the example above, only ReadBlockResponse packets
may fit SetA.
If one or more types are selected, then only those lines in the Header-Values table will be enabled for
which the corresponding field is present in all the selected types. If you select, for instance, only request

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды