manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 415

Hardware

415

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

24.2.3.3. The PCI board

This FireSpy is a PCI card. It must be build into a PC.

IDC connector
The IDC connector is an auxiliary port.The auxiliary port will be discussed in a separate chapter. See

Auxiliary connector ports

. . 

IEEE1394b connectors (3x)
With these connectors the FireSpy can be connected to the IEEE1394 bus to be analyzed.
For the FireSpy450b, both ports are beta only. For the FireSpy850, both ports are bilingual.
The FireSpy450bT(1) has 3 beta only ports that are transformer coupled.

PCI connector
The PCI connector is the connection between this FireSpy and the computer it is to work with. Place the
connector into an empty PCI slot in the computer.

DIP Switches
The FS450b(T)(1) card contains DIP Switches that can control the mode of the PHY chip. The following
modes can be set: S100, S200 and S400 (all Beta only).

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды