Avaya WLAN 8100 Series, Справочник, Страница: 88 / 382

LED management on a domain AP on page 96
Configuring and verifying the LED state on a domain AP on page 96
Configuring domain AP parameters
Use this procedure to configure parameters for a domain AP.
Note:
In earlier releases of the WLAN 8100, configuration changes made to the domain AP
database required a manual AP reset for the changes to take effect. From release 2.1
onwards, the wireless controller
config-sync
operation synchronizes configuration
changes across the domain, and an AP reset is not required.
Procedure
1. Enter the wireless configuration mode of the controller:
WC8180#conf t
Enter configuration commands, one per line. End with CNTL/Z.
WC8180(config)#wireless
WC8180(config-wireless)#
2. View the APs in the domain AP database:
Sample Output:
WC8180(config-wireless)#show wireless domain ap database
Total number of entries in AP database = 2
----------------------------------------------------------
Profile/ Radio 1 Radio 2 Preferred
AP MAC Country Channel Channel WC
----------------- ------- ------- ------- ---------------
00:1B:4F:69:E7:80 4/IN Auto Auto 0.0.0.0
00:1B:4F:6A:18:E0 7/IN 44 11 0.0.0.0
----------------------------------------------------------
WC8180(config-wireless)#
3. Enter the domain AP configuration mode for the AP whose parameters you want to
modify, using the following command:
In the following example,
00:1B:4F:69:E7:80
is the MAC address of the domain
AP whose parameters you want to modify.
WC8180(config-wireless)# domain ap 00:1B:4F:69:E7:80
Entering domain AP (mac = 00:1B:4F:69:E7:80) configuration mode...
4. Configure the appropriate parameters on the domain AP, using the following
commands:
WC8180(config-domain-ap)#?
Configure Domain AP parameters
alternate-controller Configure alternate wireless controller
default Set a command to its default values
end End configuration mode
exit Exit from domain AP configuration mode
label Configure AP Label
led-state Configure the operating state of LEDs on the AP
location Configure AP Location
model Configure AP Model
ACLI reference for Wireless LAN (WLAN) 8100
88 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com