Avaya WLAN 8100 Series, Справочник, Страница: 278 / 382

0.0.0.0 0.0.0.0 192.171.0.55 1 5 TRUE ACTIVE TRUE
Total Routes: 1
WCP8180# show ip route
===============================================================================
Ip Route
===============================================================================
DST MASK NEXT COST VLAN PORT PROT TYPE PRF
-------------------------------------------------------------------------------
0.0.0.0 0.0.0.0 192.171.0.55 1 171 2 S IB 5
10.1.21.0 255.255.255.0 10.1.21.2 1 70 ---- C DB 0
192.168.9.0 255.255.255.0 192.168.9.2 1 20 ---- C DB 0
192.168.10.0 255.255.255.0 192.168.10.2 1 30 ---- C DB 0
192.171.0.0 255.255.0.0 192.171.0.56 1 171 ---- C DB 0
Total Routes: 5
-------------------------------------------------------------------------------
TYPE Legend:
I=Indirect Route, D=Direct Route, A=Alternative Route, B=Best Route, E=Ecmp Rou
te, U=Unresolved Route, N=Not in HW
Variable definitions
Variable Value
<dest-ip> Specifies the destination IP address of the
static routes to display.
[-s<subnet><mask>] Specifies the destination subnet of the routes
to display.
Job aid
The following table shows the field descriptions for the
show ip route static
command.
Field Description
DEST Identifies the static route destination.
MASK Identifies the static route mask.
NEXT Identifies the next hop in the static route.
COST Identifies the route cost.
PREF Identifies the next preference for the route.
LCLNHOP Indicates the state of the local next hop.
STATUS Identifies the status of the route.
ENABLE Identifies whether the route is enabled.
The following table shows the field descriptions for the
show ip route
command.
Field Description
DST Identifies the route destination.
MASK Identifies the route mask.
ACLI Reference for wired networks
278 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com