manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 106 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 106

The default for the 

adhoc-clients

, 

ap-failure

 and

 rf-scan

 ageout time is

1440

 minutes. The default for the 

detected-clients

 ageout time is 

300

minutes.

WCP8180(config-security)#wids ageout adhoc-clients ?

  <0-10080>  Time in minutes

WCP8180(config-security)#wids ageout ap-failure ?

  <0-10080>  Time in minutes

WCP8180(config-security)#wids ageout detected-clients ?

  <0-10080>  Time in minutes

WCP8180(config-security)#wids ageout rf-scan ?

  <0-10080>  Time in minutes

6. Configure the Rogue 

AP

 detection interval.

WCP8180(config-security)#wids rogue-ap trap-interval ?

  <60-3600>  Interval in seconds

Use the following command to set the default interval.

WCP8180(config-security)#default wids rogue-ap trap-interval

7. Configure the Rogue 

client

 detection interval.

WCP8180(config-security)# wids rogue-client trap-interval ?

  <60-3600>  Interval in seconds

Use the following command to set the default interval.

WCP8180(config-security)#default wids rogue-client trap-interval

8. Configure the wired detection interval of a rogue AP.

WCP8180(config-security)#wids rogue-ap wired-detection-interval ?

  <1-3600>  Interval in seconds

Use the following command to set the default interval.

WCP8180(config-security)#default wids rogue-ap wired-detection-interval

9. Acknowledge Rogue clients/Rogue APs.

Acknowledge a specific Rogue AP (by specifying its MAC address) or all Rogue
APs.

WCP8180(config-security)#wids rogue-ap ack ?

  all    All rogue APs

  H.H.H  MAC Address of specific rogue AP

Acknowledge a specific Rogue client (by specifying its MAC address) or all Rogue
Clients.

WCP8180(config-security)#wids rogue-client ack ?

  all    All rogue clients

  H.H.H  MAC Address of specific rogue client

10. Enable RF Scan options.

The WIDS/WIPS functionality is driven by a process called 

RF Scan

 where APs

with radios configured for WIDS/WIPS or just the WIDS functionality, scan radio
bands/channels to collect information about neighboring APs and detected clients
in those bands/channels. They then send this information to their managed WLAN
switches over UDP.

ACLI reference for Wireless LAN (WLAN) 8100

106     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов