manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 372 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 372

<macaddr> | Adst monitor-port <portlist> mirror-MAC-A
<macaddr> | AsrcOrAdst monitor-port <portlist> mirror-MAC-A
<macaddr> | AsrcBdst monitor-port <portlist> mirror-MAC-A
<macaddr> mirror-MAC-B <macaddr> | AsrcBdstOrBsrcAdst
monitor-port <portlist> mirror-MAC-A <macaddr> mirror-MAC-B
<macaddr>}

 command to display the port-mirroring configuration.

Variable Definitions

Parameter

Description

disable

Disables port-mirroring.

monitor-port

Specifies the monitor port.

mirror-port-X

Specifies the mirroring port X.

mirror-port-Y

Specifies the mirroring port Y.

mirror-MAC-A

Specifies the mirroring MAC address A.

mirror-MAC-B

Specifies the mirroring MAC address B.

portlist

Enter the port numbers.

ManytoOneRx

Many to one port mirroring on ingress packets.

ManytoOneTx

Many to one port mirroring on egress packets.

ManytoOneRxTx

Many to one port mirroring on ingress and egress
traffic.

Xrx

Mirror packets received on port X.

Xtx

Mirror packets transmitted on port X.

XrxOrXtx

Mirror packets received or transmitted on port X.

XrxYtx

Mirror packets received on port X and transmitted on
port Y. This mode is not recommended for mirroring
broadcast and multicast traffic.

XrxYtxOrXtxYrx

Mirror packets received on port X and transmitted on
port Y or packets received on port Y and transmitted
on port X.

XrxOrYtx

Mirror packets received on port X or transmitted on
port Y.

macaddr

Enter the MAC address in format H.H.H.

Asrc

Mirror packets with source MAC address A.

Adst

Mirror packets with destination MAC address A.

AsrcOrAdst

Mirror packets with source or destination MAC
address A.

ACLI Reference for wired networks

372     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов