manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 295 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 295

Procedure

To display IGMP snoop information, enter:

show ip igmp snooping

Variable Definitions

Variable

Value

Vlan

Indicates the Vlan ID.

Snoop Enable

Indicates whether snoop is enabled (true) or disabled
(false).

Proxy Snoop Enable

Indicates whether IGMP proxy is enabled (true) or disabled
(false).

Static Mrouter Ports

Indicates the static mrouter ports in this VLAN that provide
connectivity to an IP multicast router.

Active Mrouter Ports

Displays all dynamic (querier port) and static mrouter ports
that are active on the interface.

Mrouter Expiration Time

Specifies the time remaining before the multicast router is
aged out on this interface. If the switch does not receive
queries before this time expires, it flushes out all group
memberships known to the VLAN. The Query Max
Response Interval (obtained from the queries received) is
used as the timer resolution.

Configuring IGMP parameters on a VLAN

About this task

Use this procedure to configure the IGMP parameters on a VLAN.

 Important:

The query interval, robustness, and version values must be the same as those configured

on the interface (VLAN) of the multicast router (IGMP querier).

Procedure

To configure IGMP parameters, enter the following from the VLAN Interface
Configuration mode:

[default] ip igmp [last-member-query-interval<last-mbr-query-
in>] [query-interval<query-int>] [query-max-response<query-
max-resp>] [robust-value<robust-val>] [version<1-3>]

OR
enter the following from the Global Configuration command mode:

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     295

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов