manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 233 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 233

ssh dsa-host-key

The command is executed in the Global Configuration mode.

The 

ssh dsa-host-key

 command has no parameters or variables.

no ssh dsa-host-key command

The 

no ssh dsa-host-key

 command deletes the DSA keys in the switch. A new DSA key

can be generated by executing dsa-host-key or SSH enable commands.

The syntax for the 

no ssh dsa-host-key

 command is:

no ssh dsa-host-key

The 

no ssh dsa-host-key

 command is executed in the Global Configuration mode.

The 

no ssh dsa-host-key

 command has no parameters or variables.

ssh download-auth-key command

The 

ssh download-auth-key

 command downloads the DSA authentication key into the

switch from the specified TFTP server or from the USB stick, if available.

The syntax for the 

ssh download-auth-key

 command is:

ssh download-auth-key [address] [<key-name>] [usb]

The following table describes the parameters for this command.

Table 75: ssh download-auth-key command parameters

Parameter

Description

address

Specify the TFTP server IP address.

key-name

Specify the TFTP/USB file name.

usb

Specify whether download SSH auth key from the
USB stick.
Available only if the device has USB port.

The 

ssh download-auth-key

 command is executed in the Global Configuration mode.

no ssh dsa-auth-key command

The 

no ssh dsa-auth-key

 command deletes the DSA authentication key stored in the

switch.

The syntax for the 

no ssh dsa-auth-key

 command is:

no ssh dsa-auth-key

The 

no ssh dsa-auth-key

 command is executed in the Global Configuration mode.

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     233

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов