manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 327 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 327

Configuring ports for an interface group

About this task

Use the following procedure to add ports to a defined interface group.

Note: The system automatically removes the port from an existing interface group to assign it

to a new interface group.

Procedure

Add ports by using the following command from Interface Configuration mode.

qos if-assign [port <portlist>] name [<WORD>]

Variable Definitions

Variable

Value

port <portlist>

Specifies the ports to add to interface group.

name <WORD>

Specifies name of interface group.

Removing ports from an interface group

About this task

Use the following procedure to delete ports from a defined interface group.

Note: Ports not associated with an interface are considered QoS-disabled and may not have

QoS operations applied until assigned to an interface group.

Procedure

Delete ports by using the following command from Interface Configuration mode.

no qos if-assign [port <portlist>]

Creating an interface group

About this task

Use the following procedure to create interface groups.

Procedure

Create interface groups by using the following command from Global Configuration
mode.

qos if-group name <WORD> class <trusted | untrusted |
unrestricted>

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     327

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов