manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 352 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 352

Viewing RMON events

About this task

Use the following procedure to display information regarding RMON events.

Procedure

1. Enter Privileged Executive mode.

2. Enter the 

show rmon event

 command.

Viewing RMON history

About this task

Use this procedure to display information regarding the configuration of RMON history.

Procedure

1. Enter Privileged Executive mode.

2. Enter the 

show rmon history [<port>]

 command.

Example

WCP8180(config)#

show rmon history port 1

Index Port Buckets Requested Buckets Granted Interval

----- ---- ----------------- --------------- --------

1     1    15                15              30

29    1    5                 5               1800

Variable Definitions

Variable

Definition

<port>

The specified port number for which RMON
history settings is displayed.

Job aid

The following table shows the descriptions for 

show rmon history port

 command.

Field

Description

Index

Indicates the profile index of RMON.

Port

Specifies the valid ethernet port.

Buckets Requested

Indicates the value associated with the number of buckets
specified for the RMON collection history group of
statistics. If unspecified, defaults to 50. The range is from
1 to 65535.

Buckets Granted

Indicates the value associated with the number of buckets
specified for the RMON collection history group of

ACLI Reference for wired networks

352     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов