manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 188 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 188

Displaying hardware information

Use the following command to display a complete listing of information about the status of
switch hardware in CLI:

show system [verbose]

The inclusion of the 

[verbose]

 option displays additional information about fan status, power

status, switch serial number, switch model, firmware version, hardware version, pluggable
ports, software version and manufacturing date.

Switch hardware information is displayed in a variety of locations in Web-based management
and Device Manager. No special options are needed in these interfaces to display the
additional information.

Configuring Auto-Unit Replacement

About this task

Use the following procedure to configure auto-unit replacement.

Procedure

1. Enter Privileged mode of the CLI.

2. Enter Configuration mode by entering the 

config

 command.

3. Use the command 

stack auto-unit-replacement config restore unit

<1–8>

 restore the configuration of a unit from the saved configuration on the saved

unit.

Configuring the UI button

About this task

Use the following procedure to configure UI button options.

Procedure

1. Enter Privileged mode of the CLI.

2. Enter Configuration mode by entering the 

config

 command.

3. Use the command 

ui-button unit <1–8>

 to set the unit to enable.

ACLI Reference for wired networks

188     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов