manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 311 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 311

Variable

Value

• no-opt—indicates that only IPv4 packets without

options will match this classifier element.

• with-opt—indicates that only IPv4 packets with

options will match this classifier element.

next-header

Specifies the IPv6 next header classifier criteria; range
is 0–255.

src-ip <src-ip-info>

Specifies the source IP address and mask in the form
of a.b.c.d/x for IPv4, or x:x:x:x:x:x:x:x/z for IPv6.
Default is 0.0.0.0.

session-id

Specifies the session ID.

src-port-min <port>

Specifies the L4 source port minimum value.

tcp-control <tcp-flags>

Specifies the control flags present in an TCP header.

Viewing IP classifier entries

About this task

View IP classifier entries by performing this procedure.

Procedure

View IP classifier element entries by using the following commands from the Privileged
EXEC Configuration mode.

show qos ip-element [<1-65535>] [all] [system] [user]

Variable definitions

Use the data in the following table to use 

show qos ip element

 command.

Variable

Description

<1–65535>

Displays the specified IP classifier element entry.

all

Displays all user-created, default, and system
entries.

system

Displays system entries only.

user

Displays only user-created and default entries.

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     311

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов