manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 50 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 50

WC8180(config-crypto)#certificate map radius ?

  <1-16>  Certificate Index

Use the following variable to help you map to a certificate

Variable

Description

certificate-index

The index of an X.509 certificate.

c. Use the command 

no certificate map {Captive Portal|radius}

 to

delete the mapping.

2. Use the following commands to un-map or delete a certificate.

 Note:

Certificates cannot be deleted without first un-mapping the certificate Id from an
application.

To un-map a certificate for a CP application, ensure that you first set the protocol-
mode in the Captive Portal profile to HTTP and then un-map the certificate.
Similarly, to un-map a certificate for a RADIUS application, ensure that you first
un-map the certificate from a RADIUS application and then delete the
certificate.

• Use the command 

no certificate map {Captive Portal|radius}

to delete the mapping and to un-map a certificate.

• Use the command 

no certificate {certificate-index}

 to remove

or delete a certificate.

Viewing generated certificates and their mapping

Use the following command to view generated certificates and their mapping.

Procedure

Use the following commands to view the generated and imported certificates.

a. Use the command 

show wireless crypto certificate 

to display all

generated and imported certificates.

b. Use the command 

show wireless crypto certificate detail

 to display

all generated and imported certificates in detail.

c. Use the command 

show wireless crypto certificate <index>

 to

display a particular certificate.

d. Use the command 

show wireless crypto certificate <index>

detail 

to display a particular certificate in detail.

ACLI reference for Wireless LAN (WLAN) 8100

50     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов