manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 205 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 205

Parameter

Description

priority

Specifies the server priority.
Enter an integer in the range 1-65535.

secret

Specifies the secret authentication and encryption
key used for all communications between the NAS
and the RADIUS server. The shared secret must be
the same as the one defined on the server. You are
prompted to enter and confirm the secret.

udp-port

Specifies the UDP port for RADIUS.

• <port> is an integer in the range 0–65535.

The default port number for RADIUS
authentication is 1812.
The default port number for RADIUS accounting
is 1813.

7. Use the command

 no radius profile <radius profile name>

 to delete a RADIUS

profile.

8. Use the command 

no radius server <server IP Address> <radius

profile name> 

to delete a RADIUS server.

9. Use the command 

default radius server <ip address> <health-

check-interval | health-check-password | health-check-user |
health-check-encrypted-password>

 to restore default RADIUS server

settings.

10. Use the command 

default radius profile <radius profile name>

server-selection

 to delete a RADIUS profile.

Enabling RADIUS password fallback

About this task

Enable the RADIUS password fallback feature by using the following command in Global or

Interface Configuration mode:

radius-server password fallback

When RADIUS password fallback is enabled, users can log on to the switch using the local

password if the RADIUS server is unavailable or unreachable.The default is disabled.

After you enable RADIUS password fallback, you cannot disable it without erasing all other

RADIUS server settings.

 Important:

You can use the Console Interface to disable the RADIUS password fallback without erasing

other RADIUS server settings. From the main menu, choose Console/Comm Port

Configuration, then toggle the RADIUS Password Fallback field to No.

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     205

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов