Avaya WLAN 8100 Series Скачать руководство пользователя страница 131

Страница: 131 / 382

9. Use the command

domain ap <ap_mac> reset-group-size

to configure the

Group size for AP(s) reset after download.

10. Use the command

domain ap image-update image

to enter the AP image

download configuration mode.

11. Use the command

domain ap image-update server-ip

to configure the

HTTP server address.

12. Use the command

domain ap image-update server-port

to configure the

HTTP server port.

13. Use the command

domain ap image-update external-download

download an image from an external web server.

14. Use the command

domain ap image-update download-group-size <1 -

100>

to configure the percentage of access points forming a group.

15. Use the command

domain ap image-update model <ap8120> version

<1.0.0.0> filename <path/filename> server-ip <ip_addr>
server-port <portnum>

to configure the model, version number of the AP

image, filename including http server path, server-ip address, and server port
number.

16. Use the command

domain ap reset-group-size <1 - 100>

to configure

the percentage of access points in the domain that will be reset.

17. Use the command

domain auto-promoted-aps approve

to approve all

discovered APs.

18. Use the command

domain ap model {ap8120 | ap8120-E | ap8120-O}

to configure the AP model.

19. Use these commands for configuring domain options for a specific AP.

a. Use the command

domain ap <ap_mac> alternate-controller

configure an alternate wireless controller.

b. Use the command

domain ap <ap_mac> label

to configure the AP label.

c. Use the command

domain ap <ap_mac> location

to configure the AP

location.

d. Use the command

domain ap <ap_mac> preferred-controller

configure the preferred AP controller.

e. Use the command

domain ap <ap_mac> profile-id

to assign the

appropriate AP profile ID.

Use the command

domain ap <ap_mac> radio

to configure the AP

radio.

g. Use the command

domain ap <ap_mac> serial

to configure the AP serial

number.

20. Use the command

domain mobility-vlan <vlan_name>

to create a new

mobility VLAN.

ACLI reference for the Wireless LAN (WLAN) 8100

Avaya WLAN 8100 CLI Reference

August 2013 131

Содержание WLAN 8100 Series































































































































































































































































































































































































Результаты поиска

Содержание WLAN 8100 Series

Отзывы:

Avaya WLAN 8100 Series, Справочник, Страница: 131 / 382

Результаты поиска

Содержание WLAN 8100 Series

Отзывы: