Avaya WLAN 8100 Series, Справочник, Страница: 162 / 382

no SNTP enable command
The
no SNTP enable
command disables SNTP.
The syntax for the
no SNTP enable
command is:
no sntp enable
The
no SNTP enable
command is executed in the Global Configuration command mode.
SNTP server primary address command
The
SNTP server primary address
command specifies the IP addresses of the primary
NTP server.
The syntax for the
SNTP server primary address
command is:
sntp server
primary address <A.B.C.D>
The
SNTP server primary address
command can be executed in the Global
Configuration command mode.
The following table describes the parameters for this command.
Table 15: sntp server primary address command parameters
Parameters Description
<A.B.C.D> Enter the IP address of the primary NTP server in dotted-
decimal notation.
SNTP server secondary address command
The
SNTP server secondary
address command specifies the IP addresses of the
secondary NTP server.
The syntax for the
SNTP server secondary address
command is:
sntp server
secondary address <A.B.C.D>
The
SNTP server secondary address
command is executed in the Global Configuration
command mode.
The following table describes the parameters for this command.
Table 16: sntp server secondary address command parameters
Parameters Description
<A.B.C.D> Enter the IP address of the secondary NTP server in
dotted-decimal notation.
no SNTP server command
The
no SNTP server
command clears the NTP server IP addresses. The command clears
the primary and secondary server addresses.
The syntax for the
no SNTP server
command is:
no sntp server {primary |
secondary}
ACLI Reference for wired networks
162 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com