manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 107 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 107

Use the following commands to enable RF Scan options for a radio profile. You
must be in the radio profile configuration mode of the CLI.
Use the following commands to configure RF-Scan.

WCP8180(config-radio-profile)#rf-scan ?

  band                         Set RF scan band (for wids-wips profile only)

  duration                     Set RF scan duration

  scan-other-channel           Enable other channel scan

  scan-other-channel-interval  Set other channel scan interval

Use the following command options to configure RF-Scan band.

WCP8180(config-radio-profile)#rf-scan band ?

  2.4GHz  Scan 2.4 GHz band

  5GHz    Scan 5 GHz band

  both    Scan both 2.4 and 5 GHz bands

Use the following commands to configure RF-scan duration.

WCP8180(config-radio-profile)#rf-scan duration ?

  <10-2000>  Set scan duration (in milliseconds)

Use the following commands to enable other channel scan and set the scan interval
in a radio profile.

WCP8180(config-radio-profile)#scan-other-channel

WCP8180(config-radio-profile)#scan-other-channel-interval

 Note:

To disable a scan option, prefix the command with 

no

.

Verifying configuration of WIDS-WIPS

Use the following commands to verify WIDS-WIPS configuration.

Procedure

1. Verify RF scan configuration using the following command.

Show wireless security wids-wips rf-scan

Sample output:

WCP8180#show wireless security wids-wips rf-scan 

Domain Role                            :Active MDC

Total Rogue APs                        :6

Total Unknown APs                      :93

Detected AP MAC   SSID             Ch  Status  Mitigation LastSeen    

----------------- ---------------- --- ------- ---------- ------------

00:02:6F:14:30:10 CP-User-OAP      1   Unknown NotRogue   0d:22:48:33 

00:02:6F:BD:94:70 Dinesh-OAP-Test  11  Unknown NotRogue   0d:00:00:29 

00:02:6F:BD:94:B0 user-db-test.17  8   Unknown NotRogue   0d:00:01:48 

00:02:6F:BD:95:20 test123          11  Unknown NotRogue   0d:00:00:29 

ACLI reference for the Wireless LAN (WLAN) 8100

Avaya WLAN 8100 CLI Reference

August 2013     107

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов