manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 264 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 264

Procedure

To display port debug information, use the following command from Privileged EXEC
mode.

show lacp debug member [<portList>]

Displaying LACP aggregators

About this task

Use the following procedure to display LACP aggregators or LACP trunks.

Procedure

To display aggregators, use the following command from Privileged EXEC mode.

show lacp aggr <1-65535>

Configuring LACP system priority

About this task

Use the following procedure to configure the LACP system priority. It is used to set the system-

wide LACP priority. The factory default priority value is 32768.

Procedure

To configure system priority, use the following command from Global Configuration
mode.

lacp system-priority <0-65535>

Enabling LACP port aggregation mode

About this task

Use the following procedure to enable the port aggregation mode.

Procedure

To enable the port aggregation mode, use the following command from Interface
Configuration mode.

[no] lacp aggregation [port <portList>] enable

Use the 

no

 form of the command to disable.

Configuring the LACP administrative key

About this task

Use the following procedure to configure the administrative LACP key for a set of ports.

ACLI Reference for wired networks

264     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов