manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 27 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 27

Configure capture instance

Command

Parameters

Description

ap

Specifies the AP MAC address to restart the
wireless capture instance.

profile

Specifies the capture profile to restart.

Configuring and managing Client Band Steering and Client load
balancing

Client Band Steering is a technique used to increase the overall capacity of a dual-band
wireless network composed of multiple APs that use both the 2.4 GHz and 5.0 GHz radios.

You typically enable Client Band Steering and Client Load Balancing when you configure
Access radio profiles.

Client stations predominantly support 2.4GHz. Many modern client stations have dual-band
support yet tend to favor connection to 2.4GHz networks (although some popular modern
clients still only support 2.4GHz, e.g. the Apple iPhone 4). As a result, dual-band networks
have the 2.4GHz band heavily utilized, and the 5GHz band under utilized. The objective of
Client Band Steering is to encourage 5GHz capable client stations to use the 5GHz radio
instead of the 2.4GHz radio, leaving the 2.4GHz radio for stations that only support 2.4GHz.

As part of Client load-balancing configuration, you enable/disable the Load balancing. After
you enable load balancing, you configure the following parameters:

•

utilization-start (%)

 — Utilization level at which client association load balancing begins

•

utilization-cutoff (%) 

— Client association load balancing cutoff. If this threshold is

exceeded, all further client associations are refused.

 Important:

This cutoff is useful so that controller CPU utilization is maintained at an optimum level.
If CPU utilization goes beyond 100%, it causes the controller to restart which in turn
results in an unprecedented controller outage.

About this task

Use this procedure to configure client band steering and client load balancing in access radio

profiles.

Procedure

1. Create an Access Radio profile.

Configure 

A-N

 and 

BG-N

 radio profiles to support different radio frequencies. The

following examples shows the creation of A-N and BG-N radio profiles with the

ACLI reference for the Wireless LAN (WLAN) 8100

Avaya WLAN 8100 CLI Reference

August 2013     27

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов