manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 321 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 321

Variable

Value

• classifier—displays QoS UBP classifier entries.

• interface—displays QoS UBP interface entries.

• name—specifies the label to display a particular UBP

template entry.

user-policy

Displays QoS User Policy entries.

Displaying QoS capability policy configuration

About this task

Display QoS meter and shaper capabilities for system ports by performing this procedure.

Procedure

Display QoS capability policy configuration by using the following command from
Privileged EXEC mode:

show qos capability {meter [port] | shaper [port]}

Variable Definitions

Variable

Value

meter [port]

Displays granularity for committed rate, maximum committed
rate and maximum bucket that can be used on ports for
meters.
port—specifies list of ports. Displays the information for
particular ports

shaper [port]

Displays granularity for committed rate, maximum committed
rate and maximum bucket that can be used on ports for
shapers.
port—specifies list of ports. Displays the information for
particular ports

QoS Agent configuration

Related topics:

Globally enabling and disabling QoS Agent support

 on page 322

Configuring a default queue set

 on page 322

Modifying default queue configuration

 on page 323

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     321

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов