manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 314 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 314

Variable

Description

<1–65535>

Displays the specified Layer2 classifier element
entry.

all

Displays all user-created, default, and system
entries.

system

Displays system entries only.

user

Displays only user-created and default entries.

Removing Layer 2 elements

About this task

Use the following procedure to delete Layer 2 element entries.

Procedure

Delete element entries by using the following command from Global Configuration
mode.

no qos l2-element <1-55000>

Linking IP and L2 classifier elements

About this task

Use the following procedure to link IP and L2 classifier elements.

Note: A classifier that is referenced in a classifier block or installed policy cannot be deleted.

Procedure

Link elements by using the following command from Global Configuration mode.

qos classifier <1-55000> set-id <1-55000> [name <WORD>]
element-type {ip | l2 | system} element-id <1-55000>

Variable Definitions

Variable

Value

classifier <1-55000>

Specifies the classifier ID; range is 1–55000.

set-id <1-55000>

Specifies the classifier set ID; range is 1–55000.

name <WORD>

Specifies the set label; maximum is 16 alphanumeric
characters.

ACLI Reference for wired networks

314     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов