manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 130 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 130

  image-update      Configure AP image update related parameters

  reset-group-size  Configure group size for a bulk RESET

WCP8180(config-wireless)#domain auto-promoted-aps ?

  approve  approve all Discovered AP

WCP8180(config-wireless)#domain load-balance

WCP8180(config-wireless-lb)# ?

Load Balance configuration commands

  controller  Controller load balance configuration commands

  default     Set load-balance parameters to default

  end         End configuration mode

  exit        Exit from domain load-balance configuration mode

  lb-metric   Load balance metric for both AP and WSP

  no          Remove AP/WSP lb metrics

WCP8180(config-wireless-lb)#lb-metric ?

  least-load  Load balance to the least loaded device

  location    Load balance to the device in the nearest location(C.B.F.S)

WCP8180(config-wireless)#domain mobility-vlan ?

  WORD  Enter a mobility VLAN name (1-32 chars)

About this task

Use this procedure to configure domain options:

Procedure

1. Enter Wireless Configuration mode of the CLI.

2. Use the command 

domain ap-client-qos

 to enable access point QoS

operations for clients.

3. Use the command

 domain ap-reconnection-timeout

 to configure the AP-

controller failover timeout.

4. Use the command 

domain auto-promote-discovered-ap

 to enable auto

promotion of discovered access points.

5. Use the command 

domain client-roam-agetime <1 - 120>

 to configure

the client roaming timeout value in seconds.

6. Use the command 

domain country-code <country_code>

 to configure a

code for domain operation.

 Note:

When creating an AP profile, specify a country code or use the default ‘primary’
country code of the domain. To change a country code after a profile has been
created you must delete the AP profile and create a new profile. Multiple-country
domain names support a maximum of 32 countries.

7. Use the command 

domain tspec-violation-report-interval <0 -

900>

 to configure the TSPEC violators reporting interval in seconds.

8. Use the command 

domain ap <ap_mac> image-update 

to configure AP

image update related parameters.

ACLI reference for Wireless LAN (WLAN) 8100

130     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов