manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 242 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 242

Procedure

To enable automatic PVID, use the following command from Global Configuration
mode.

[no] auto-pvid

Use the 

no

 form of this command to disable

Configuring VLAN port settings

About this task

Use the following procedure to configure VLAN-related settings for a port.

Procedure

To configure VLAN port settings, use the following command from Global Configuration
mode.

vlan ports [<portlist>] [tagging {enable | disable | tagAll |
untagAll | tagPvidOnly | untagPvidOnly}] [pvid <1-4094>]
[filter-untagged-frame {enable | disable}] [filter-
unregistered-frames {enable | disable}] [priority <0-7>] [name
<line>]

Variable Definitions

Variable

Value

<portlist>

Enter the port numbers to be configured for a VLAN.

tagging {enable|disable|tagAll|
untagAll| tagPvidOnly|
untagPvidOnly}

Enables or disables the port as a tagged VLAN
member for egressing packet.

pvid <1-4094>

Sets the PVID of the port to the specified VLAN.

filter-untagged-frame {enable|
disable}

Enables or disables the port to filter received untagged
packets.

filter-unregistered-frames {enable |
disable}

Enables or disables the port to filter received
unregistered packets. Enabling this feature on a port
means that any frames with a VID to which the port
does not belong to are discarded.

priority <0-7>

Sets the port as a priority for the switch to consider as
it forwards received packets.

name <line>

Enter the name you want for this port.
Note: This option can only be used if a single port is
specified in the <portlist>

ACLI Reference for wired networks

242     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов