manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 136 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 136

 Important:

As part of the configuration, when you configure profiles in the network (such as AP profiles,
network profiles and radio profiles) ensure that you configure profile name to be unique
across the network, for each of the profiles.

Also, ensure that you do not configure profile names that have similar characters or letters
but are different only in their 

case

.

 Important:

When you configure an SSID for a network profile, ensure that it is unique across the
network. SSIDs can have a maximum of 32 characters.

Also, ensure that you do not configure SSIDs that have similar characters but are different
only in their case. For example do not configure SSIDs 

avaya-demo

 and 

AVAYA-DEMO

within the same network.

About this task

Use this procedure to configure wireless profiles.

Procedure

1. Enter Wireless Configuration mode of the CLI.

2. Use the command 

network-profile <1-64>

 to create a network profile.

This command has the options listed in the following table.

Command

Option

Description

network profile
<1-64>

arp-suppression

Enable wireless ARP
suppression.

captive-portal

Configure captive portal
mapping.

client-qos

Configure client QoS
settings.

cos2wmm

WMM values for CoS
settings.

default

Set default network
profile settings.

dot1x

Configure 802.1x
parameters.

end

End configuration.

exit

Exit configuration.

hide-ssid

Enable SSID hiding in
network beacons.

ACLI reference for Wireless LAN (WLAN) 8100

136     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов