manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 187 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 187

Parameters

Description

• static

• custom

line number

Enter the banner line number you are setting.
The range is 1 to 19.

LINE

Specifies the characters in the line number.

This command is executed in the Privileged EXEC command mode.

no banner command

The 

no banner

 command clears all lines of a previously stored custom banner. This

command sets the banner type to the default setting (STATIC).

The syntax for the command is:

no banner

The

 no banner

 command is executed in the Privileged EXEC command mode.

Displaying the default TFTP server with CLI

About this task

The default TFTP server configured for the switch can be displayed in CLI at any time by using

the folowing command:

show tftp-server command

This command has no parameters and is executed in the Privileged EXEC mode.

Displaying complete GBIC information

About this task

Complete information can obtained for a GBIC port using the following command: 

show

interfaces gbic-info <port-list>

Substitute 

<port-list>

 with the GBIC ports for which to display information. If no GBIC is

detected, this command does not show any information.

This command is available in all command modes.

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     187

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов