manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 355 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 355

Parameter

Description

[trap]

Generate SNMP trap messages for events.

[description <LINE>]

Specify a textual description for the event.

[owner <LINE>]

Specify an owner string to identify the event entry.

Deleting RMON event table entries

About this task

Use the following procedure to clear entries in the table.

Procedure

1. Enter Global Configuration mode.

2. Enter the 

no rmon event [<1-65535>]

 command to delete the entries.

Variable Definitions

Variable

Definition

[<1-65535>]

Unique identifier of the event. If not given, all
table entries are deleted.

Configuring RMON history

About this task

Use the following procedure to configure RMON history settings.

Procedure

1. Enter Global Configuration mode.

2. Enter the 

rmon history <1-65535> <LINE> <1-65535> <1-3600>

[owner <LINE>]

 command to configure the RMON history..

Variable Definitions

Parameter

Description

<1-65535>

Unique index for the history entry.

<LINE>

Specify the port number to be monitored.

<1-65535>

The number of history buckets (records) to keep.

<1-3600>

The sampling rate (how often a history sample is collected).

[owner <LINE>]

Specify an owner string to identify the history entry.

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     355

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов