Avaya WLAN 8100 Series, Справочник, Страница: 190 / 382

web-server command
The
web-server
command enables or disables the web server used for Web-based
management.
The syntax for the
web-server
command is:
web-server {enable | disable}
The web-server command is executed in the Global Configuration command mode.
The following table describes the parameters for this command.
Table 38: web-server command parameters
Parameter Description
enable | disable Enables or disables the web server.
no web-server command
The
no web-server
command disables the web server used for Web-based
management.
The syntax for the
no web-server
command is:
no web-server
The
no web-server
command is executed in the Global Configuration command mode.
Setting the read-only and read-write passwords
About this task
The first step to requiring password authentication when the user logs in to the switch is to edit
the password settings. To set the read-only and read-write passwords, perform the following
procedure.
Procedure
1. Access CLI through the Telnet protocol or a Console connection.
2. From the command prompt, use the cli password command to change the desired
password.
cli password {read-only | read-write} <password>
The following table describes the parameters for this command.
ACLI Reference for wired networks
190 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com