Avaya WLAN 8100 Series, Справочник, Страница: 71 / 382

Diffserv Policy Name: None None
WC8180#
11. Use the following command to view current DiffServ configuration.
WC8180#show running-config module wireless diffserv
AP Client QoS configuration attributes
Use the following attributes to configure AP Client QoS.
Criteria Description
Match All Specifies that a packet must match all criteria of the classifier
block.
Allow signifies that all packets will match the selected IP
ACL and Rule and will be either permitted or denied.
The
Match All rule overrides all other filtering rules, so if
Match All is set, the other rules are not configurable.
Protocol Specifies the packet’s protocol as the match condition for the
selected rule.
The protocol is identified by a number. This number is a
standard value assigned by IANA and is an integer in the
range
1 to 255 .
Source IP Address Specifies the packet’s source port IP address as the match
condition for the rule.
The address you enter is compared with the packet's source
IP Address. You must also specify a source IP Mask with the
Source IP Address.
Source IP Mask Specifies the source IP address wildcard mask.
The wild card masks determines which bits are used and
which bits are ignored. A wild card mask of
255.255.255.255 indicates that no bit is important. A
wildcard of
0.0.0.0
indicates that all of the bits are
important.
Wildcard masking for ACLs operate differently from a subnet
mask. A wildcard mask is in fact the inverse of a subnet mask.
With a subnet mask, the mask has ones (
1 ) in the bit
positions that are used for the network address, and has
zeros (
0
) for the bit positions that are not used. In contrast,
a wildcard mask has a 0 in the bit position that must be
checked and a 1 in the bit position that can be ignored.
Note:
This field is required when you configure a source IP
address.
ACLI reference for the Wireless LAN (WLAN) 8100
Avaya WLAN 8100 CLI Reference August 2013 71