manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 48 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 48

key-size 1024 | 2048 |
4096

Size of the key

common-name

A name such as a user name or a server name ( 0–
64 characters)

country-code

A country code (2 characters)

state-name

Name of the state or province ( 0–128 characters)

organization

Name of the organization ( 0–64 characters)

organization-unit

Name of the organization unit such as section or
subdivision ( 0–64 characters)

email

E-mail address (0–128 characters)

valid

Certificate validity period in days

(Optional) Use the command 

no certificate <certificate-index>

 to

remove the self-signed certificate.

Importing a certificate

Certificates generated by 3rd party CA can be imported using TFTP. The certificate is imported
by providing details such as file type, filename and TFTP IP address and a passphrase. The
certificate Pkcs12 type must only be imported.

 Note:

Certificates when generated or imported successfully are synchronized automatically to
peer controllers in a cluster, without the need to execute the command 

wireless

controller config-sync

 on the AMDC.

Certificates that failed to import are displayed on the AMDC with the failure status reason.

About this task

Use the following commands to import Pkcs12 type certificates.

Procedure

Import an X.509 certificate

 from a 

PKCS#12

 by executing the following steps:

a. Enter the Wireless Crypto configuration of the CLI.
b. Use the following command to import a self-signed certificate:

WC8180(config-crypto)#certificate import pkcs12 3 ?

  filename  Name of the file to import

  tftp-ip   TFTP Server IP

WC8180(config-crypto)#certificate import ?

  pkcs12  Import a PKCS12 certificate

ACLI reference for Wireless LAN (WLAN) 8100

48     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов