Avaya WLAN 8100 Series Скачать руководство пользователя страница 58

Страница: 58 / 382

3. Use the command

wireless auto-rf channel-plan {a-n | b/g-n}

apply

to apply the proposed channel adjustment plan.

4. Use the command

wireless auto-rf power-plan start

to run the power

planning algorithm.

Note:

The

apply

option in the command

wireless auto-rf power-plan

is not

supported in the current release.

5. Use the command

clear wireless auto-rf power-plan

to clear the

wireless power plan.
This command clears all the APA power adjustments and resets all radios to their
default power level.

Viewing Auto-RF configuration and status

Use this procedure to view and verify Auto-RF configuration.

CLI reference:

WC8180# show wireless auto-rf ?

Display auto-rf infomation

channel-plan Display auto-rf channel plan settings

power-plan Display auto-rf power plan settings

View Auto-RF channel plan settings:

WC8180#show wireless auto-rf channel-plan ?

Parameters:

a-n 802.11 a/n radio frequency band

bg-n 802.11 bg/n radio frequency band

<cr>

Sub-Commands/Groups:

history Display auto-rf channel plan history

proposed Display auto-rf proposed channel adjustments

View Auto-RF power plan settings:

WC8180#show wireless auto-rf power-plan ?

<cr>

View the AP radio power plan status.

WC8180#show wireless ap radio power-plan status ?

detail Show mananged AP radio status in detail

H.H.H AP MAC Address

<cr>

This command has further viewing options for a particular AP.

ACLI reference for Wireless LAN (WLAN) 8100

58 Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Результаты поиска

Содержание WLAN 8100 Series

Отзывы:

Avaya WLAN 8100 Series, Справочник, Страница: 58 / 382

Результаты поиска

Содержание WLAN 8100 Series

Отзывы: