Avaya WLAN 8100 Series Скачать руководство пользователя страница 168

Страница: 168 / 382

Related topics:

show ip dns command

on page 168

ip domain-name command

on page 168

no ip domain-name command

on page 168

default ip domain-name command

on page 168

ip name-server command

on page 169

no ip name-server command

on page 169

show ip dns command

The

show ip dns

command is used to display DNS-related information. This information

includes the default switch domain name and any configured DNS servers.

The syntax for this command is:

show ip dns

This command is executed in the User EXEC command mode.

ip domain-name command

The

ip domain-name

command is used to set the default DNS domain name for the switch.

This default domain name is appended to all DNS queries or commands that do not already

contain a DNS domain name.

The syntax for this command is:

ip domain-name <domain_name>

Substitute

<domain_name>

with the default domain name to be used. A domain name is

determined to be valid if it contains alphanumeric characters and contains at least one period

(.).

This command is executed in the Global Configuration command mode.

no ip domain-name command

The

no ip domain-name

command is used to clear a previously configured default DNS

domain name for the switch.

The syntax for this command is:

no ip domain-name

This command is executed in the Global Configuration command mode.

default ip domain-name command

The

default ip domain-name

command is used to set the system default switch domain

name. Because this default is an empty string, this command has the same effect as the

ip domain-name

command.

The syntax for this command is:

default ip domain-name

This command is executed in the Global Configuration command mode.

ACLI Reference for wired networks

168 Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Результаты поиска

Содержание WLAN 8100 Series

Отзывы:

Avaya WLAN 8100 Series, Справочник, Страница: 168 / 382

Результаты поиска

Содержание WLAN 8100 Series

Отзывы: